The basic principle for washing the facade – not to spoil the finish of aggressive chemicals. And if the internal cleaning of the premises or building can be carried out entirely on their own, then the problem of cleaning the facade from the outside, especially buildings with a large number of floors or warehouses, manufacturing facilities in mind a number of features associated primarily with the need to possess certain skills to use a special technique and knowledge of technology, under By only specialized services. In the case of outdoor cleaning windows and facades particularly prevalent following methods: – using forests and ski lifts – with the involvement of industrial mountaineers. Also actively enter the market European technology washing the facade "of the land" with the use of telescopic rods. The undoubted advantage of attracting a cleaning company is efficiency and relatively inexpensive service (compared with content of its own services). Cost of services for cleaning the facade depends on the extent of contaminated sites. The main difference – in the process and the final result. The first two methods of cleaning the outside rather slow and traumatic.
Professionals need to be approved to allow work at height. Washing facility begins only after the installation of forests or fixed ropes on the roof (the facade) building. Typically, preparation for work takes about an hour. Same amount of time required after the completion of the work to parse the above structures. The whole process of washing glasses by hand can be divided into pre-cleaned dry glass, coating the glass spray detergent, glass processing special brush, and then a final cleaning of glass from all the residues of moisture a special squeegee for cleaning windows. Cleaning of the facade is carried out aggressive means, but due to the fact that there is no permanent access to clean water, constantly have to change the instruments used, productivity is not high. Also be aware that some types of modern facades require particularly careful treatment. In operation, for example, with the glass in contact with someone must be kept to a minimum, which is not always possible to guarantee the work promalpinista.
At the cost of mistakes can be expensive facade repairs element. Working with the use of modern European technology eliminates these drawbacks. Car cleaning company have special containers for water, which is in the process is cleaned of impurities and heated to a temperature of 15-20 degrees. Heated, is passed through the ion exchange resin water absorbs different kinds of dirt without damaging the surface. With the help of a machine installed in pumps and hoses cleaned heated water under mild pressure is applied to the height, enabling users to make cleaning windows and facades with perfect quality and no divorce after drying. During the cleaning of the facade experts are on the ground. Performance this method is very high – the washing process starts 10 minutes later with the arrival of cleaning service at the facility. And one day a team of two experts in the average wash 1000 sq.m. facade surface. When non-professional care costs operation can be unnecessarily increased by the need to unplanned and even cosmetic overhaul, and with the right, on the contrary, decrease. And in both cases the cost overruns or savings in time and finances the higher, more expensive materials used in finishing. That's why technology is washing the facades should be consistent with the owner of the building on the basis of technical documentation on the facades.